A direct system is a heating system where the heat emitters are directly connected to a boiler or district heating system. This means, that the district heating water is supplied directly to the consumer’s radiators or other heat surfaces.
Disinfection is one of the most important processes in water treatment. This step eliminates microorganisms in drinking and process water to ensure safe water use according to relevant regulations and directives.
District heating describes a water-based heating system where there is a considerable distance between the place the heat is generated (power plant) and the place the heat is used (the building).
Downtime costs / loss of production (Cs)
The measurable cost of a pump stoppage is modest seen over its lifetime in a commercial building. However the comfort loss to building users makes a stand-by pump advisable.
Drinking water regulations
Disinfection is an essential step in any water treatment process. Most countries have specific guidelines or regulations, which describe the allowed methods and concentrations in the treated water.
A dry cooler is an air-cooled device that is used in connection with removal of excess heat. The cold media, normally water, is circulated through the dry cooler, where heat exchange with the surrounding air heats up the media.
Dry running protection
Dry-running protection is one of the most important monitoring functions, as bearings and shaft seal may be damaged if the booster pumps run dry. It is thus always recommend to install dry-running protection on all booster sets.